MONTAGUE 243W36 Dokumentacja Pobierz pdf (Strona 13)

SM-13

GAS FIRED BROILERS

CARRIAGE POSITION HANDLE

ADJUSTMENT PROCEDURE

The carriage position handle can be placed in a

number of vertical positions.

1. Grasp the black ball knob and press it in toward

the front control panel.

2. Raise or lower the carriage assembly to the

desired height.

3. Release pressure on the black ball knob to lock

the carriage assembly at the desired height.

Figure 15. Carriage Position Handle

Handle Tension Adjustment

If carriage is difficult to move or will not stay in place,

the handle tension requires adjusting.

1. Remove black ball knob and chrome sleeve.

2. Turn threaded rod to the left to increase tension;

turn to the right to decrease tension.

CARRIAGE TENSION SPRING

ADJUSTMENT PROCEDURE

Carriage adjustments should be made with the grid

irons in place and allowance for product weight.

Figure 16. Carriage Tension Spring

1. Locate the carriage tension spring adjustment

nut. The adjustment nut is accessible from the

front as follows:

Model Nos. 36W36 and 43W36:

Through lower compartment.

Model Nos. 136W36 and V136W36:

Behind valve panel.

Model Nos. C36, C45, 236W36 and 243W36:

Behind left and right front panels.

2. Turn nut clockwise to increase tension or

counterclockwise to decrease tension.

3. If one side of the grid is lower than the other side,

turn the adjustment nut on the low side clockwise

to level the grid.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Brak uwag

MONTAGUE 243W36 Dokumentacja Strona 13