MONTAGUE 243W36 Dokumentacja Pobierz pdf (Strona 10)

SM-10

The MONTAGUE Company

CARRIAGE POSITION HANDLE

The carriage position handle consists of the parts

shown in the following illustration and parts list.

Figure 11. Carriage Position Handle

Item Part No. Description Quantity

A 02033-8 Knob, Black Ball 1

B 32756-5 Compression Spring 1

C 03503-3 Gear and Tube Assembly 1

D 03506-8 Stud, Threaded 1

E 03504-1 Sleeve, Chrome 1

F 14442-8 Handle Bracket 1

Black Ball Knob

1. Remove the black ball knob by unscrewing it

(counterclockwise) from the threaded stud.

2. Replace the black ball knob by screwing it

(clockwise) onto the threaded stud.

Chrome Sleeve

1. Turn off the burners.

2. Allow the broiler to cool to room temperature.

3. Remove the black ball knob by unscrewing it

(counterclockwise) from the threaded stud.

4. Remove the sleeve from the tube/threaded stud

assembly.

5. Replace the chrome sleeve by placing the sleeve

onto the threaded stud.

Threaded Stud

1. Turn off the burners.

2. Allow the broiler to cool to room temperature.

3. Remove the black ball knob by unscrewing it

(counterclockwise) from the threaded stud.

4. Remove the chrome sleeve from the tube/threaded

stud assembly.

5. Unscrew the threaded stud from the tube.

6. Reinstall the threaded stud by performing the

above steps in reverse order. Screw the threaded

stud about 1" into the threaded end of the tube.

Gear and Tube Assembly

1. Turn off the burners.

2. Allow the broiler to cool to room temperature.

3. Remove the black ball knob by unscrewing it

(counterclockwise) from the threaded stud.

4. Remove the chrome sleeve.

5. Remove gear with bracket from the cabinet frame.

6. Slide the gear and tube assembly off the carriage

position handle arm.

7. Replace the gear and tube assembly by performing

the above steps in reverse order.

Compression Spring

1. Turn off the burners.

2. Allow the broiler to cool to room temperature.

3. Remove the black ball knob by unscrewing it

(counterclockwise) from the threaded stud.

4. Remove the chrome sleeve.

5. Remove the threaded rod.

6. Remove the spring from the tube and gear

assembly using needle nose pliers.

7. Replace the compression spring by performing

the above steps in reverse order.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

MONTAGUE 243W36 Dokumentacja Strona 10

Komentarze do niniejszej Instrukcji